Red-lion G3RS User Manual

Browse online or download User Manual for Computer Accessories Red-lion G3RS. Red Lion G3RS User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
1
GENERAL DESCRIPTION
The G3 proprietary expansion slot provides a high speed, parallel architecture
that extends the functionality and flexibility of the G3 series HMI. This
approach allows the G3 series to evolve concurrently with the latest advances in
communications and standards, without sacrificing performance. This high
bandwith channel has significantly greater throughput when compared to the
traditional (external) serial gateway approach.
The G3RS option card is easily installed by removing the rear cover of your
G3 operator interface, attaching the card using three screws and connecting a
single cable. Adding this card gives the operator interface another RS232 port
and RS422/485 port. It is built with isolation to protect equipment from
potentially harmful ground loops, and provides high speed RS232, RS422,
RS485, and DH485 communications for many different types of hardware.
SAFETY SUMMARY
All safety related regulations, local codes and instructions that appear in the
literature or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
Do not use the controller to directly command motors, valves, or other
actuators not equipped with safeguards. To do so can be potentially harmful to
persons or equipment in the event of a fault to the controller.
CONTENTS OF PACKAGE
- G3RS Option Card
- Cable already attached to G3RS option card
- Hardware pack consisting of three screws
- This hardware bulletin
ORDERING INFORMATION
MODEL NO. DESCRIPTION PART NUMBER
G3RS
RS232/485 option card for G3 operator interfaces
with isolated high speed communications ports
G3RS0000
CBL Communications Cables
1
CBLxxxxx
DR DIN Rail Mountable Adapter Products
2
DRxxxxxx
SFCRM2 Crimson 2.0
3
SFCRM200
1
Contact your Red Lion distributor or visit www.redlion.net/g3 for complete
selection.
2
Red Lion offers RJ modular jack adapters. Refer to the DR literature for
complete details.
3
Use this part number to purchase Crimson on CD with a printed
manual, USB cable, and RS-232 cable. Otherwise, download from www.
redlion.net/g3.
MODEL G3RS - RS232/485 OPTION CARD FOR G3 OPERATOR
INTERFACE TERMINALS
Bulletin No. G3RS-D
Drawing No. LP0586
Released 10/10
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
CAUTION: Risk of Danger.
Read complete instructions prior to
installation and operation of the unit.
Connector
(side 2)
mounting holes,
3 plcs.
CONFIGURED USING CRIMSON SOFTWARE (VERSION 2.0 OR
LATER)
ISOLATED RS232 AND RS485 MULTIPLEXED PORTS CAPABLE
OF COMMUNICATING WITH RS232, RS422, RS485, AND DH485
DEVICES AT UP TO 115,200 BAUD.
POWERED AND CONFIGURED FROM G3 OPERATOR
INTERFACE TERMINAL
INSTALLATION AND CONNECTION HARDWARE INCLUDED
WITH CARD
WARNING - EXPLOSION HAZARD - SUBSTITUTION OF ANY
COMPONENT MAY IMPAIR SUITABILITY FOR CLASS I,
DIVISION 2
THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I,
DIVISION 2, GROUPS A, B, C, D, HAZARDOUS LOCATIONS,
OR NON-HAZARDOUS LOCATIONS ONLY
WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT
EQUIPMENT WHILE THE CIRCUIT IS LIVE OR UNLESS THE AREA
IS KNOWN TO BE FREE OF IGNITABLE CONCENTRATIONS.
Page view 0
1 2 3 4

Summary of Contents

Page 1 - INTERFACE TERMINALS

1GENERAL DESCRIPTIONThe G3 proprietary expansion slot provides a high speed, parallel architecture that extends the functionality and flexibility of t

Page 2 - SPECIFICATIONS

21. POWER REQUIREMENTS:Power is supplied to the option card from the main board of your G3 operator interface.2. COMMUNICATIONS:Serial Ports: Format a

Page 3 - RS485 RS232

3CONFIGURING A G3RS OPTION CARDThe G3RS is configured using Crimson software. Crimson is available as a free download from www.redlion.net/g3, or it c

Page 4 - SOFTWARE/UNIT OPERATION

SOFTWARE/UNIT OPERATIONLEDSThe transmit LED(TX) will flash when information is transmitted from the G3RS card. The receive LED(RX) will flash when inf

Comments to this Manuals

No comments