Red-lion GMTC/GMRTD Modules for Thermocouples and RTDs User Manual download pdf

 DEDICATED HIGH DENSITY INPUT MODULES FOR THE

GRAPHITE SERIES

 MODELS AVAILABLE TO ACCEPT ±10 V, 0/4-20 mA,

THERMOCOUPLE AND RTD INPUTS

 ±10 V AND 0/4-20 mA INPUT VERSIONS FULLY SCALABLE

 UNUSED INPUTS CAN BE DISABLED TO INCREASE OVERALL

READING RATE

 IDEAL FOR DATA-ACQUISITION APPLICATIONS

 CAN BE USED IN CONJUNCTION WITH ANY GRAPHITE

MODULES

GENERAL DESCRIPTION

The Model GMTC, GMRTD, GMINI, and GMINV are 16-bit analog input

modules designed for use with the Graphite Series. These modules provide a

means of high-density signal measurement for data-acquisition applications.

The GMTC module accepts a wide range of thermocouple types, while the

GMRTD accepts various RTD inputs. The GMINI and GMINV accept 0/4-20

mA and ±10 V process signals, respectively.

The modules connect and communicate via proprietary USB connection to the

various Graphite host devices. The Graphite host devices, equipped with serial

ports as well as an Ethernet port(s), allows the system to share data with PCs,

PLCs, and SCADA systems. The maximum number of modules varies for each

Graphite host device, see specific models for details.

Once programmed, the module will continue to operate/ control independent of

the Graphite host device as long as power is applied. Remove power from the host

device before installing or replacing any modules.

CONFIGURATION

The Graphite Series is configured with Windows

compatible Crimson

software. The software is an easy to use, graphical interface which provides a

means of configuration and commissioning of new systems, as well as routine

module re-calibration.

SAFETY SUMMARY

All safety related regulations, local codes and instructions that appear in the

manual or on equipment must be observed to ensure personal safety and to

prevent damage to either the instrument or equipment connected to it. If

equipment is used in a manner not specified by the manufacturer, the protection

provided by the equipment may be impaired.

Do not use the module to directly command motors, valves, or other actuators

not equipped with safeguards. To do so can be potentially harmful to persons or

equipment in the event of a fault to the module. An independent and redundant

temperature limit indicator with alarm outputs is strongly recommended.

MODELS GMTC, GMRTD, GMINI, GMINV -

GRAPHITE™ SERIES ANALOG INPUT MODULES

Bulletin No. GM8-C

Drawing No. LP0919

Released 04/14

Tel +1 (717) 767-6511

Fax +1 (717) 764-0839

www.redlion.net

CAUTION: Risk of Danger.

Read complete instructions prior to

installation and operation of the unit.

CAUTION: Risk of electric shock.

4.65

(118)

1.25 (32)

2.97 (76)

DIMENSIONS In inches (mm)

US LISTED

IND. CONT

. EQ.

34AD

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - 2.97 (76)

1 DEDICATED HIGH DENSITY INPUT MODULES FOR THE GRAPHITE SERIES  MODELS AVAILABLE TO ACCEPT ±10 V, 0/4-20 mA, THERMOCOUPLE AND RTD INPUTS ±10 V A

Page 2 - GENERAL SPECIFICATIONS

GENERAL SPECIFICATIONS1. POWER: Power will be supplied by the Graphite host device.2. LEDs:STS - Status LED shows module condition.ALM - Alarm LED is

Page 3 - BLOCK DIAGRAM FOR

3GMINV8 SPECIFICATIONS21. INPUTS:Channels: 8 single-endedRanges: 0-10 VDC or ±10 VDCEffective Resolution: Full 16-bitProgrammable Scaling: ±30,000Samp

Page 4 - EMC INSTALLATION GUIDELINES

4HARDWARE INSTALLATIONModules must be installed beginning with slot 1 (left-most slot), with no empty slots between the modules, and the order must ma

Page 5 - Terminals 1 to 6

5WIRINGWIRING CONNECTIONSAll conductors should meet voltage and current ratings for each terminal. Also, cabling should conform to appropriate standar

Page 6 - CONFIGURATION

6ORDERING INFORMATIONTYPE DESCRIPTION PART NUMBEROperator Interface PanelsGraphite 7" Color Touch Screen, Indoor, 24 VDC Powered G07C0000Graphit

Page 7

7This page intentionally left blank

Page 8 - LIMITED WARRANTY

LIMITED WARRANTYThe Company warrants the products it manufactures against defects in materials and workmanship for a period limited to two years from

Comments to this Manuals

No comments

Red-lion GMTC/GMRTD Modules for Thermocouples and RTDs User Manual

Browse online or download User Manual for Computer Accessories Red-lion GMTC/GMRTD Modules for Thermocouples and RTDs. Red Lion GMTC/GMRTD Modules for Thermocouples and RTDs User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Computer Accessories Red-lion GMTC/GMRTD Modules for Thermocouples and RTDs