Red-lion PMK8 User Manual download pdf

PMK8 DIMENSIONS In inches (mm)

The PMK8 panel mount adapter kit is used to mount a PAX meter into an

existing GEMINI panel cut-out. The kit includes two durable steel mounting

plates painted black and a neoprene gasket. The Adapter Kit, when used with a

meter which has NEMA 4/IP65 specifications, will meet NEMA 4/IP65

requirements when properly installed.

MODEL PMK8 - PANEL MOUNT ADAPTER KIT FOR PAX TO GEMINI CUT-OUT

ORDERING INFORMATION

Bulletin No. PMK8-X

Drawing No. LP0559

Effective 12/02

Tel +1 (717) 767-6511

Fax +1 (717) 764-0839

www.redlion-controls.com

MODEL NO. DESCRIPTION PART NUMBER

PMK8 Panel Mount Adapter Kit (PAX to Gemini) PMK80000

MOUNTING PLATE ADAPTER PLATE

PMK8 INSTALLATION

1. Apply the panel gasket (provided with the meter) over the PAX meter.

2. Insert the PAX meter through the mounting plate.

3. Apply the panel gasket (provided with the adapter kit) over the

PAX meter behind the mounting plate.

4. Insert the PAX meter with mounting plate and gaskets into the

front of the existing Gemini hole cut-out. Slide the adapter

plate over the rear of the PAX meter.

5. Slide the panel latch (provided with the meter) over the

rear of the PAX meter and tighten the screws.

PMK8 DIMENSIONS In inches (mm)The PMK8 panel mount adapter kit is used to mount a PAX meter into anexisting GEMINI panel cut-out. The kit includes tw

No comments

Red-lion PMK8 User Manual