Red-lion MDC User Manual download pdf (Page 15)

USER SETPOINTS MODULE

The User Setpoints Module is accessed

from any of the Indication Displays, or

from any of the main menus in the

Programming Module (except Operating

Mode Menu), by pressing the SET key.

Pressing “SET” once enters the

Setpoint Scroll Menu. In this menu, the

current speed or ratio setpoint may be

incremented or decremented using the Up

and Down arrow keys. The top line of the

display shows the current setpoint value

and the bottom line shows actual speed in

display units.

Pressing “SET” a second time enters the

User Setpoints Menu. The top line shows

the Setpoint description and the bottom

line shows the Setpoint value. The up and

down arrow keys may be used to scroll

through the loop. Pressing the SEL key

allows the value to be changed in a Value

Edit Menu. Press ESC to exit the User

Setpoints Module.

The following flowchart shows only the

User Setpoints portion:

-13-

S Note: These maximums are

additionally limited by unit

scaling. See individual

descriptions for details.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 50 51

No comments

Red-lion MDC User Manual Page 15