Red-lion TCU User Manual download pdf (Page 75)

ON/OFF and PID control can be used for the heat and cool outputs in

several combinations.

The following lists the v alid control modes:

OP1 & OP2 VALID CONTROL MODES

OP1

MODE

OP2

MODE

MANUAL MODE

OUTPUT POWER

RANGE

OP1

STATE

OP2

STATE

PID — 0% to +100% OP1-TP —

ON/OFF

PrOP = 0.0

— 100 OP1-ON —

Any other setting OP1-OFF —

PID PID -100% to +100% OP1-TP OP2-TP

PID ON/OFF

(GAN2=0.0)

0% to +100% OP1-TP OP2-OFF

-100% to 0% OP1-TP OP2-ON

ON/OFF

(PrOP=0.0)

ON/OFF

(GAN2=0.0)

+100% OP1-ON OP2-OFF

-100% OP1-OFF OP2-ON

Any other setting OP1-OFF OP2-OFF

TP - Time Proportioning

Note: In manual mode, the % output power is not limited to the output

power limits (OPLO & OPHI)

Figure 38, OP1/OP2 On/Off Action

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 103 104

THE TEMPERATURE 1
CONTROLLER 1
US LISTED 2
Table of Contents 3
GENERAL DESCRIPTION 9
SAFETY SUMMARY 10
Installation Environment 11
Standard Unit Installation 11
Removing Bezel Assembly 13
Installing Bezel Assembly 13
Unit Removal Procedure 13
Output Modules 14
Select Input Sensor Type 15
Select AC Power (115/230 VAC) 15
EMC INSTALLATION GUIDELINES 16
Wiring Connections 16
error of 2.5°C/ohm of 17
FRONT PANEL DESCRIPTION 20
OPERATION OVERVIEW 21
Configuration Of Parameters 23
Parameter Entry 24
Normal Display Mode 24
UNPROTECTED PARAMETER MODE 25
PROTECTED PARAMETER MODE 27
Front Panel Program Disable 28
HIDDEN FUNCTION MODE 29
Input Module (1- In) 30
Output Module (2-OP) 33
Lockouts Module (3-LC) 36
from the temperature 41
Communication Format 56
Sending Commands And Data 56
Receiving Data 59
PC (Cont’d) 62
Serial Connections 62
HEATER CURRENT MONITOR OPTION 65
VALVE POSITION OPTION 66
Velocity Mode Valve Control 67
SECOND ANALOG INPUT OPTION 68
PID CONTROL 71
Derivative Time 72
PID Adjustments 72
PID Adjustments (Cont’d) 73
ON/OFF CONTROL 74
AUTO-TUNE 76
Initiate Auto-Tune 77
Plastics Extruder Application 79
APPENDIX “D” - MANUAL TUNING 89
Closed Loop Cycling Method 90
APPENDIX “E” - CALIBRATION 91
Second Input Check 92
Heater Current Monitor Check 92
Second Analog Input Check 92
Valve Positioner Check 92
Calibration 92
UNIT NUMBER 95
CONFIGURE INPUT 95
CONFIGURE OUTPUT 95
CONFIGURE LOCKOUTS 96
CONFIGURE ALARMS 96
CONFIGURE COOLING 96
CONFIGURE SECOND ANALOG INPUT 97
CONFIGURE VALVE POSITIONER 97
CONTROLLER OPERATING MODE 97
HEATER CURRENT MONITOR MODELS 98
LIMITED WARRANTY 103
TCU/IM - N 02/13 104
DRAWING NO. LP0235 104

Comments to this Manuals

No comments

Red-lion TCU User Manual Page 75

Comments to this Manuals

Related products and manuals for Hardware Red-lion TCU