Red-lion TSC User Manual download pdf (Page 29)

FRONT PANEL PROGRAM DISABLE

There are several ways to limit operator access to the programming of

parameters from the front panel buttons. The settings of the parameters in the

parameter lockout module, the code number entered, and the state and/or

function of the user input (terminal #7) affect front panel access.

The following chart describes the possible program disable settings.

TERMINAL #7

User Input

Programmed

For PLOC

Code Number Description

Inactive 0 Full access to all modes and parameter modules.

Active 0 Access to protected parameter mode only. Code

number will NOT appear.

Active Any # between

1 & 250

Access to protected parameter mode. Correct

programmed code number allows access to

unprotected parameter mode and configuration

modules.

NOT programmed

for PLOC

0 Full access to all modes and parameter modules.

NOT programmed

for PLOC

Any # between

1 & 250

Access to protected parameter mode. Correct

programmed code number allows access to

unprotected parameter mode and configuration

modules.

Note: A universal code number 222 can be entered to gain access to the

unprotected mode and configuration modules, independent of the

programmed code number.

-27-

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 91 92

No comments

Red-lion TSC User Manual Page 29